 |
|
|
|
Spin
Jet®
|
|
Floor
& Grate
Cleaners
NLB's
patented SPIN JET® rotating spray systems have proven
their ability in the harshest environments. Applications
include paint booth grate cleaning, coating removal,
highway stripe removal, airport runway rubber removal,
surface preparation, concrete scarification, and hydrodemolition.
Now NLB’s lightweight models make the power of
rotating water jets more maneuverable than ever. Designed
for operator comfort and low maintenance, Vortex™
floor and grate cleaners can be used independently,
or as part of a HydroPrep™ system.
FEATURES/BENEFITS:
•
Vacuum recovery available.
•
Uses NLB's Barjet™ ultra-high pressure spray bar.
•
Fast-acting NLB dump valve (DSJ12260), constructed of
stainless steel, reduces water pressure to near-zero
when in dump position.
•
Hard rubber wheels for easy movement over a number of
surfaces.
•
Air-powered for consistent rotational speed.
|
|
|
| Model
No. |
Discharge
Pressure (Max.) |
Max.
Flow |
| 36-9900-15A |
40,000
psi (2,800 bar) |
11
gpm (42 lpm) |
| 36-9950-15A |
40,000
psi (2,800 bar) |
11
gpm (42 lpm) |
|
| HydroPrep
Systems |
|
NLB’s
versatile HydroPrep™ system quickly removes coatings,
scale, rust, and other tough adherents from steel and
other metal surfaces, leaving a “white metal”
finish. It also prepares concrete without damage. A
wide range of accessories lets users perform automated
or semi-automated surface preparation.
VertaJet™
Model SRT-6
The
NLB VertaJet™ SRT-6
was specifically designed for large, vertical surfaces.
The hand-held system, attached to a vacuum source, allows
an operator to clean while collecting the wastewater
and debris. A steel surface is clean and dry in a single
pass.
The system will remove paint, epoxy and other coatings
from storage tanks, ship hulls and buildings without
dust or sparks, and minimizes containment concerns.
The 6” cleaning path allows for greater production
rates while the lightweight aluminum frame and counterbalance
reduce operator fatigue.
The VertaJet™ SRT-6
uses a dual trigger operating system, similar to the
Model NCG8400A-3
hand-held lance, to control a Bi-Mode Valve. The valve
dumps the system pressure if the operator releases either
trigger.
|
|
|
FEATURES/BENEFITS:
•
Vacuum attachment for recovery of water and debris.
•
Counterbalanced to minimize operator fatigue.
•
Compact design lightweight aluminum construction.
•
Uses NLB BARJET™ and NLB8466 BI-Mode™ Valve technology.
•
6” (15 cm) cleaning pattern.
|
|
|
Vacuum
System
NLB's BM15986
is a compact, lightweight source of vacuum for recovering
water and debris. It easily mounts in the back of a pick-up
truck, with a 220-gallon (833 l) tank.
The system provides 1,000 cfm @ 6"-8" (152-203
mm) of mercury. It fits into a 4' x 8' space (1.2 x 2.4
m) and weighs just 2,000 lbs. (908 kg) |
|
|
|
Ship
Bottom Cleaner
The NLB Model SBC36-8300-15A
allows a single operator to remove coatings from ship
bottoms. It is pneumatically operated, with handle-mounted
controls for high-pressure water, SPIN JET® rotation,
cart movement and cleaning head height adjustment. Vacuum
recovery of water and debris is optional.
Other specialized systems are also available. Contact
NLB for details.
•
Cleans overhead horizontal surfaces.
•
Optional vacuum recovery
•
Self-propelled, up to 5 feet per minute (1.5 m/min.).
•
Maximum pressure 40,000 psi (2,800 bar), maximum flow
6 gpm (23 lpm).
•
Height adjustment from 40.5” to 70.5” (103
to 179 cm)
|
|
|
|
SRT-10
CRAWLER
The Model SRT-10
Crawler is an automated surface preparation system that
quickly strips vertical and horizontal surfaces, like
tank walls and floors, or ship hulls and decks.
The SRT-10
Crawler uses vacuum to grip the surface and recover
wastewater and debris. A winch skid assembly with locking
pulleys (included) acts as a fall arrest system and
allows the operator to quickly position the Crawler
on vertical surfaces. The system is driven and steered
by pneumatically powered wheels, not by the cable system.
The entire system is operated from a control console,
allowing the operator the best location to view the
work area.
NLB’s SRT-10
Crawler also utilizes a rotating center hub design that
allows the crawler to clean both up-and-down and side-to-side
on vertical surfaces without the need to re-rig the
system.
FEATURES/BENEFITS
•
Vacuum recovery of water
and debris
•
Remotely operated
•
Horizontal and vertical movement
•
Fall arrest system
•
Removes epoxies, paints and other coatings
•
Cleans over welds/plates up to 1/2” (12.7 mm) surface
deviation
|
Back
to Top
|
|
|
|
|
|
